All you need to know about inverter batteries in Noida
An inverter, also known as a power inverter, is an electronic device that converts DC to AC for a variety of home appliances. Usually the DC source is an inverter battery or solar panels. These batteries are generally classified as deep cycle batteries. In this article we are going to talk about everything you need to know about inverter batteries. Keep reading to know more.
Today, most household appliances are designed to work with alternating current from the mains. But some home appliances, such as laptops and mobile phones, use direct current. Alternating current is usually converted to direct current by an electronic circuit. An inverter is a device that does the opposite.
Inverters are used in different types of home appliances, refrigerators, air conditioning units, and light bulbs. In addition, they are used to supply power to traffic lights, laboratory equipment and ATMs. This is the reason why batteries are very important for inverters.
Direct current is taken from the batteries of the inverter and converted into alternating current by means of a special circuit. Apart from this, the batteries are recharged using the inverter. In fact, a battery is a main component of an inverter. The functionality of this device depends on the battery.
Inverter Battery Parts
The function of a battery is to convert chemical energy into electrical energy. And all the parts are arranged as a “cell”. Let’s talk about some of the parts of an inverter battery.
Electrolyte: In acid batteries, the electrolyte consists of distilled water and sulfuric acid. Generally, inverters use wet or acid cell batteries. There are two types of these batteries: sealed and wet cell.
In the wet cell type, the liquid electrolyte is used. On the other hand, in a single sealed time, you can find it or a fiberglass mat that contains liquid electrolyte.
Terminals: The negative side terminal is made of pure lead. The positive side terminal is made of Pb02. Both terminals are made as “plates”. Lead-acid batteries contain acidic electrolytes and lead plates.
Separators: There are separators between the negative plates and the positive plates to avoid a short circuit by physical contact. Generally, rubber is used to make most types of spacers. The good thing about rubber is that it is the best option to use for battery acid.
Cooling Fans – Although cooling fans are not part of the system, you can find them on the inverter system to dissipate heat. Apart from this, other components are also used in the systems such as alarms and LED lights. The purpose of these components is to display the status of the batteries.
And then there are the microprocessor-based circuits. The purpose of this system is to make sure the battery is properly charged.
In short, this was an introduction to inverter batteries and their main components.